,

Geobiological corrector, Blanche Merz type, 324 g

234,00 €

A shape wave of 324 grams, to place in a home or a room to put it back in order.

It neutralises, or helps to neutralise, water veins and water tables, vortices, cosmo-telluric chimneys and the memories of walls, before or after a geobiology session, and it keeps the session in place. One corrector for 120 m², floors included, placed at the spot that Guillaume Liffran reads on the plan of your house.

Three oval pebbles stacked in a single rounded surface, designed by Guillaume Liffran from his dimensioned sketch and harmonised according to the classic rules of energy work. 324 g: 3 + 2 + 4 = 9, the rule of 9.

324 g · 16.3 × 12.4 cm · green PLA · 120 m² per corrector · €234, whose digits add up to 9

What it is for

A place is read like a person. With the antenna held vertically, I walk through the house and read what is in the way: the grids that run under a bed, a cosmo-telluric chimney in the middle of a bedroom, the memory of a wall. I deal with geobiology, cosmobiology and the in-between worlds together, because the disorders are the same there. Once the place has been read and released, the corrector is placed at the spot found, to keep the place in order over time.

It neutralises, or helps to neutralise, what weighs on a place, before or after a geobiology session. And once the session is done, it keeps it in place.

What it neutralises

Water veins and water tables, vortices, cosmo-telluric chimneys, the memories of walls and the memories of objects. It also works on the great black lodges, the black lodges and malevolent energies.

Its emanation is pyramidal, expanding towards its top.

With a geobiology session, or on its own?

Both. It does not replace the visit of a geobiologist, mine or a colleague’s: it extends it. After a session, it keeps the place as the session left it. For a heavily charged place, I advise starting with a session: that is what allows the corrector to hold everything.

Placed on its own, it works too. Left for several days in the same spot, it helps to release, little by little, all that is harmful in the place. How my geobiology session goes.

How many do I need, and where do I put it?

One corrector for 120 m², floors included. A house of less than 120 m², even on two floors, needs only one. Above 120 m², you need two.

To give its full potential, it is placed at a precise spot: often where a vortex passes, but this changes from one house to another. After your order, send me the plan of your house: I read it and tell you where to put it.

What people tell me after placing it

The feedback is very good. The people in whose homes it is placed tell me that they sleep better, that they get up less often at night to go to the toilet, and that they feel more settled in the rooms where they rest, in front of the television for example.

What sets it apart

Three rounded oval pebbles, set one on top of the other, the smallest at the top, and above all a single continuous surface: no hollow, no shoulder, no undercut between the pebbles, a gentle slope from one to the next, the bottom rounded without a break, no flat at the top. It is a protective shape wave, harmonised according to the classic rules of energy work. It stands on a flat of 2.5 × 4.3 cm.

The rule of 9

With the pendulum as with the antenna, I read a person, a place or an object on a scale from 0 to 9. At 9, everything flows: “at 9, you are as good as new”. 9 is the last digit before starting again at 1, the one that contains all the others (1 + 2 + … + 9 = 45, and 4 + 5 = 9). It is a reading convention, not a measurement, and that is precisely what makes it solid. So everything I make is set on 9 or 3: the corrector weighs 324 g (3 + 2 + 4 = 9, and 324 = 9 × 36), its little sister the amulet 33.3 g, and its price makes 9 (2 + 3 + 4). You can check it with a calculator. Where the 9 comes from, and why I hold to it.

How it was made

Drawn on a dimensioned sketch, the profile traced from my line, without redrawing the curves. 3D-printed in green PLA, in layers of 0.1 mm, three walls and 20 % infill, for a smooth surface, with no visible printer lines, and a weight of 324 g. Same workshop, same rule as my antennas and my pendulums: the shape first, the right weight, a clean finish.

How to use it

Place it where the place calls for it: in the room where you sleep, where you work, or at the spot read during a session. I show you the exact spot on the plan of your house. It needs no setting and does not wear out. If you do not know where to put it, I explain how a place is read, and a remote session is enough to do it with you. To wear on you, it exists in small: the 33.3 g amulet.

What else it does in a place, I write here as the readings go on.

A tool for energy practice, for well-being: it makes no diagnosis, treats no illness and replaces neither medical advice nor a treatment.

Why neither wood nor brass

324 g. Plant-based plastic (PLA), made from corn and sugar cane: no nickel, no varnish, washable with soap and water, and it weighs exactly what I decided, at every print. Brass and wood have their nobility; I keep metal where it is useful. Why I chose weight first.

Made by hand for you, then tuned one by one

Each tool is made by hand, for the person who orders it, in my workshop in Entraigues-sur-la-Sorgue: so there is a making time. The simplest way: order, your payment takes your place in the workshop queue, then call me. We set the date together.

Once made, no tool leaves without this last step: I tune each piece energetically, one by one. I read it with the antenna and the pendulum, as I read a person or a place, and I work on it until it is right. Between half an hour and an hour per tool, so that it is perfect when you receive it: you open it, it is ready.

A video will come with each tool: how to connect to it, how to cleanse it, how to activate it, with my tools or simply with your hands. It is on its way, with a code to scan that leads to it.

Specifications

  • Weight: 324 g · resting flat: 2.5 × 4.3 cm
  • Dimensions: 16.3 × 12.4 cm, 11.5 cm high
  • One corrector for 120 m², floors included; above that, two
  • Material: green PLA, 3D-printed (0.1 mm layers, 3 walls, 20 % infill)
  • Design and making: Guillaume Liffran, Entraigues-sur-la-Sorgue
  • Free delivery in France · 14 days to change your mind · 2-year legal guarantee

A question before ordering? Call +33 6 80 72 12 54, or write to me on WhatsApp.

Weight 324 g

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Shopping Cart
Scroll to Top